The Scubapro Inox Bottle buckle is a fundamental piece for diving lovers. Manufactured from high quality stainless steel, this buckle ensures strength and durability in demanding underwater environments. Designed specifically for use on diving tanks, the Scubapro Inox Tank Buckle offers a...
Lightweight stainless steel tanks with special printings for an optimum protection and luminous metal painting. In compliance with national and European regulations( 97/23/CE, 84/525/CE, ADR and R.A.P.-ITC MIE AP7).
Volume: 12 l.
External diameter: 168 mm.
Pressure under work: 230...
Lightweight stainless steel tanks with special printings for an optimum protection and luminous metal painting. In compliance with national and European regulations ( Directive 97/23/CE, 84/525/CE, ADR and R.A.P.-ITC MIE AP7)
Volume: 15 l.
External diameter: 204 mm.
Pressure under...
4Lightweight stainless steel tanks with a special coating for an optimum protection and luminiscent metal paint. Manufactured in compliance with European and national regulations (Directive 97/23/CE, 84/525/CE, ADR and R.A.P.-ITC MIE AP7).
Volume: 10 l.
External diameter: 168 mm....
Lightweight stainless steel tanks with a special coating for an optimum protection and luminiscent metal paint. Manufactured in compliance with European and national regulations (Directive 97/23/CE, 84/525/CE, ADR and R.A.P.-ITC MIE AP7).
Volume: 12 l.
External Diam. 168 mm.
Operating...
Lightweight steel diving bottles with special primers for optimal protection and luminescent metallic paint. Manufactured in accordance with national and European regulations (Directive 97/23 / EC, 84/525 / CE, ADR and RAP-ITC MIE AP7). Volume: 18 l. Diam.Exterior: 204 mm. Operating...
High resistance. Lightweight aluminum scuba tanks with special primers for optimal protection and luminescent metallic paint. Manufactured in accordance with national and European regulations (Directive 97/23 / CE, 84/525 / CE, ADR and RAP-ITC MIE AP7). These cylinders have a mono LS valve....
Lightweight steel diving tanks with a special primer coating for an optimum protection, and luminiscent metal paint. Made in compliance with Spanish and European regulations, (Directive 97/23/CE, 84/525/CE, ADR and R.A.P.-ITC MIE AP7). Mono LS valve and culotte.
Volume: 10 l.
External...
The Beuchat recreation intervention kit consists of: Adjustable harness with integrated weight 2 liter bottle / 230 bar Regulator Pressure gauge Mask Tube All this presented in a practical bag. Estimated capacity: 5 minutes at 10 meters. Knowledge of scuba diving is required to...
The weight pocket in the bottle ring of the Cressi brand allows the ideal distribution of the weight in axis with the bottle and without interfering with the stability and adherence of the vest. specs Compatible with all vest models. Usable as a container for ballast bags. Strong...
The Scubapro 143 mm 9-10 liter Central Bar measures 143 mm and has a capacity of 9-10 l. Features: Measurements: 143mm. Capacity: 9-10 liters. With isolation tap.
The Scubapro 168 mm 12-15 liter Central Bar measures 168 mm and has a capacity of 12-15 l. Features: Measurements: 168mm. Capacity: 12-15 liters. With isolation tap.
The Scubapro Back Pack Complete Harness 7-18 liters serves as an accessory for bottles, with a capacity of 7 to 18 liters. Features: Full Harness: For diving cylinders. Capacity: From 7 to 18 litres.
The Scubapro BPI Hose Inflator 65 cm has a soft nozzle, an easy-to-locate inflation button and hose measures 65 cm. Features: Design: Hydrodynamic and ergonomic. Inflation button: Easy to locate. Mouthpiece: Soft. Hose: 65 cm.
The Scubapro BPI New Inflator was redesigned in 2013. It also has a soft nozzle, an easy-to-locate inflation button and a 65 cm hose. Features: Design : After 2013. Hydrodynamic and ergonomic. Inflation button: Easy to locate. Mouthpiece: Soft. Hose: 65 cm.
The Scubapro S-Tek Donut Wings allow buoyancy control, each one has an inflator hose and are very resistant. Features: Buoyancy control: Reliable, regardless of dive position. Rounded profile: Smooth and controlled air movement. Inner bladder: Made of 500D sanity, protected by...
The Scubapro S-Tek Pure Dorsal Plate Harness features a 3D plate with holes and webbing to hold the harness to size. Features: Design: Hydrodynamic and minimalist. Adjustable: Allows the shoulder straps to be stretched to facilitate donning and doffing. Waist buckle: Made of...
The Scubapro S-Tek Pro Dorsal Plate Harness can be adjusted thanks to the buckles and straps, it has a bottle holder and a carrying handle. Features: Stainless Steel Tek Loc Buckles : Individually adjustable shoulder straps for easy donning and doffing. Monprene Molded Padding:...
The Scubapro S-Tek Single Tank Adapter designed for holding a tank while diving. Characteristic: Single tank: For diving with a single tank. Material: Lightweight marine grade aluminium, resistant to sea conditions. Unique webbing band: Makes it easy to attach the tank....