The Main Switch Talamex WT Cap is a waterproof main switch with a rubber cap. Features: Water resistant, designed for the nautical sector. With rubber cover (IP55), for greater protection. Diameter: 58 mm. Electric current intensity: 500 A, 75 A constant.
The Bilge Seachoice Automatic Switch 12V 15A transforms any manual pump into an automatic one. Features: Transforms manual pump into automatic. Made of non-corrosive ABS material , a very resistant plastic. Activated by ball. Volts: 12 Amps: 15 Dimensions:...
For more safety
Made of resistant polypropilene, with four points for ventilation, that don't allow rain intake. 4 points to enter the cables in each square. Includes a retention strap. For batteries up to 26,6 cm length x 17,5 cm width and x 19 cm height.
The Attwood Automatic Switch With Float 12-24 V 73x133 mm can be placed on horizontal surfaces, and up to an angle of 24?. Features: Installation: Horizontal, and up to an angle of 24?. The wiring does not bend with the float. It has an integral casing, which protects the...
The Seachoice Non-Locking Batteries Switch (1 to 2) allows selection of batteries for cranking, charging or parallel operation. Features: Allows you to select the batteries for starting, charging or operating with both in parallel. It has fire protection. For use with two...
The Attwood Automatic Switch With Float 12-24 V 67x108 mm can be placed on horizontal surfaces, and up to an angle of 24?. Features: Installation: Horizontal, and up to an angle of 24?. The wiring does not bend with the float. Resistant sealing, withstands humidity, smoke...
The Sea Dog Line 3 Position Switch has the functions of off, ignition and start. Features: 3 positions: Off, Ignition, Start. Material: Polypropylene. Shaft diameter: 21 mm. Maximum panel thickness: 29 mm. Terminals: 3 screws.
The Johnson Pump Floating Electromagnetic Switch activates the pump when the water level reaches 51mm, and deactivates it when the water level reaches 19mm. Features: Compact mechanical switch. Activates the pump: Water level 51 mm. Deactivates the pump: Water level 19...
The Hella Marine On-Off Battery Switch allows the main battery cable to be interrupted to protect unauthorized use of the boat. Features: Interruption of the main battery cable, to prevent unauthorized use. The positive and negative cables can be disconnected. The key...
The Johnson Pump Automatic Float Switch works through a steel bar, which changes the pressure of the switch when the water level exceeds the recommended level, and starts the pump. Features: Automatic switch, works without mercury. When the water exceeds the recommended level,...
The Seachoice 2-Eye Installation Battery Switch features a rust and corrosion protected casing, key and cover. Features: Casing protected against rust and corrosion. Key and cover: They prevent corrosion.
The Seachoice 3 Position Key Ignition Switch with Choke is compatible with most boats with inboard motors and OMC outboards. Features: 3 positions: Off, ignition and starter. Compatible with boats with inboard motors and OMC outboards. Continuous current: 2A 12V....
The Bilge Seachoice Circuit Breaker 36V 15A activates the pump automatically. Features: Automatic activation of the pump. Compatible with all DC pumps. Fire protection. Marine grade tin plated wiring , made to withstand the harsh conditions of the sea. Amps:...
Flush fitted Socket Made of plastic resistant to corrosion with anti-UV treatment and protective lid to avoid splashes.
Dimensions:
20 mm.
Maximum power:
16 Amp.
High performance To plug in three electric devices to a type lighter socket. All metallic pieces including screws are made of stainless steel to offer a better performance in a marine environment.
The Battery/Relay Switch? Blue Sea Systems Mini Automatic Charging "Add a battery" combines battery banks for an emergency jump start. Features: Automatic loading of a two-bank system. Emergency start. E Series Dual Circuit Plus Battery Switch . rel? of automatic...
The Blue Sea Systems E Series 1, 2, Both, Off Battery Switch allows you to turn two batteries on and off separately or at the same time without damaging the alternator. Features: Power: 350 A continuous, for gasoline and diesel engines. Design in a single piece of tinned...
The Blue Sea Systems E-Series On-Off Battery Switch allows you to turn batteries on and off without damaging the alternator. Features: Power: 350 A continuous, for gasoline and diesel engines. Design in a single piece of tinned copper , which does not loosen over time....
The Sea Dog Line On-Off Toggle Switch is rated at 15A and 12V, and has on and off positions. Features : Made of brass, molded in bakelite. Power: 15A 12V On position in parentheses: Momentary . Positions: On/Off. Terminals: 4 spades. Type: SPST
The Bilge Rule Automatic Switch 12-24 V With Fuse Holder has a removable base for easier cleaning. Characteristic: Detachable base, for easier cleaning. Contains no mercury, environmentally friendly. Amps: 14 Description: With fuse holder, to protect the fuse....
The Bilge Rule Automatic Switch 12-24 V Without Fuse Holder has a removable base for easier cleaning. Features: Detachable base, for easier cleaning. Contains no mercury, environmentally friendly. Amps: 14 Description: Without fuse holder. Dimensions: 57mm x 127mm x...
The Attwood Automatic Switch With Float 12-24 V 73x133 mm Bulk can be placed on horizontal surfaces, and up to an angle of 24º. Characteristic: Installation: Horizontal, and up to an angle of 24°. The wiring does not bend with the float. It has an integral casing, which...