The Fenix C7 flashlight 3000 lumens rechargeable it 's a high r flashlightallowance for for industrial maintenance and other applications, with magnetic base for hands-free, rechargeable with USB type C, 3,000 lumens, range of 470 meters, 68 h autonomy in Eco mode, battery level indicator, 5 modes, and ignition lock.
Characteristics
- Design: High performance flashlight for for industrial maintenance and other applications.
- USB charging Type C.
- A voltage of not more than 300 V 5,000 mAh, including.
- Maximum power: Up to 3,000 lumens in turbo mode.
- Maximum beam distance: Up to 1,500 feet.
- Autonomous: 68 hours in Eco mode.
- Magnetic base: Para hold the flashlight on a metal surface and have your hands free to work.
- Measures 149 x 40 x 28 mm .
- Weight: 172 g, without battery.
- It includes: Fenix C flashlight, rechargeable ARB-L21-5000 battery, USB type C charging cable, cord, spare toric seal, user manual and warranty card.
- LED: LED Luminus SST70, with a service life of 50,000 hours.
- Side switch: Para on and off.
- Full charge time: three hours. Once charged, it is recommended keep the USB cover closed to keep it waterproof.
- Battery level indicator: Para know the load.
- The material: Aluminium A6061-T6, durable, with a high-quality HAIII hard anodised abrasive finish.
- The modes: 5 general modes, Strobo mode and SOS mode.
- Color temperature is: 6.500K.
- The voltage: 3.6V.
- Lock of ignition: Double-click the switch to lock or unlock.
- Switch to lower mode: After continuous use, the focus does not allow a higher mode to be selected to avoid overheating, so when it reaches a temperature of 60°C or more, the light will automatically drop to lower the temperature, and when the temperature drops below 60°C, it will allow the user to re-select higher modes. When the battery level is below the preset level, the intensity is also reduced to Eco mode.
- Blinking: When the battery is low in Eco mode, the light flashes three times every five minutes to remind you to recharge, or replace, the battery. If you keep blinking to recharge or replace, theit is recommended to clean the contact points with a cotton swab soaked in isopropyl alcohol.
Please, login to leave a review