Semi-automatic shotgun Savage 64 FV-SR - 22 LR

Ref.: C104738

Sorry, this product cannot be shipped to your country

Secure payments

Guaranteed returns


Semi-automatic shotgun Savage 64 FV-SR - 22 LR

Designed for beginners, training, control of small animals, plinking and sport shooting. Accurate and reliable, has a heavy-duty gun with a length of 419 mm (16,5) and a diameter of 0,8, manufacture from carbon steel by button rifling, in which SAVAGE is a true specialist. It is topped at its end by a thread with thread cross-section of 1/2 × 28 and thread cover. The cannon is channeled, with six grooves of approximately 229 mm, which reduces weight and accelerates cooling.

The action, which is slightly thicker than the cannon, is very narrow and elongated, giving it a stylized look. Thanks to this and other characteristics, the weight of the rifle is minimal 2,46 kg. What. He has serial installation of a Picatinny rail for placing an optical.

Lat the lock knob, located on the right side of the action, is equipped at the end with a grinding wheel to facilitate operation. What. The reinforcement system is by mass inertia. Tafter the last shot, the lock doesn't open. Para to block the action by leaving it open, the tightening lever must be retracted to a specific point along the action and then pushed into a notch to hook it.

The firing system is the brand's most traditional Savage, of two stages. What. He 's got one very clean breakdown with a consistent weight of 2.26 Kg. It's the right weight for a general-purpose carbine like this, it's a comfortable trigger that helps with accuracy. The trigger is protected by an oversized polymer guard.

In relation to safety, it includes a sliding fuse with a large grinding knob for safe operation. What. You place on the trigger and push it back actively the trigger lock fuse and pushing it forward deactivates it for the rifle to fire. There's a bright red dot that can be seen when the rifle is in "fire" condition.

The headstock is made of matte black polymer and has a simple satin finish. Thanks to the material and finishing, this weapon allows uncompromising operation in the most adverse climatic conditions, avoiding rust and wear. The backrest is straight Monte Carlo type allowing easy accommodation for all types of viewfinder. The pistol is large with an ambidextrous configuration, with bulging on both sides for greater comfort. It complements this ergonomics with textured areas on both sides of the handguard for better grip.

The the loader is a metal monocoil, with a capacity of 10 rounds, causing it to protrude approximately 38 mm (1.5) from the bottom of the headstock. It's easy to load and has a bright red plastic tile, which makes it easier to see through the ejection window if it's empty. In addition, the release button of the charger is located just in front of the compartment where it is housed and must be pushed upwards to release it.


Characteristics

  • Semi-automatic carbine in 22 LR of high reliability
  • System of ironing by mass inertia
  • Heavy cannon with thread, grooved and 419 mm (16.5) in length
  • Manufacture from materials of any heading
  • For the purposes of this Regulation, the following definitions shall apply:
  • Picatinny rail installed

Technical data sheet

  • Semi-automatic action
  • Gun length: 42 cm.
  • Finished: Synthetic
  • It's called a caliber
  • Total length (mm): 922
  • Weight (g): 2500
  • Stretching time: 1:16
  • Loading capacity: 10
Data successfully sended
An error has occurred. Please, try again.