Reel Shimano Spheres SW A

The reel Shimano Spheres SW A it has eight models in total within which you can choose in different sizes, thus practically covering all the fish in salt water. It is perfect for fishing with light or medium bait from the coast as well as for tropical fishing with Popper for the GTs and tuna. It features highly powerful and simple winding, plus Hagane and X-Shio gears that further maximize winding power.

Specifications

• Body built from aluminum XT-7 / X-Shield
• There's no extra coil
• Cold-formed double anodised aluminium coil
• 4+1 bearings
• Single screw crank of machined aluminium and finished in rubber
• X-shield brake

The following technologies:

• The Hagane Gear: striking for its strength and durability, it is manufactured using the exclusive cold forging process of Shimano.
• Xship: they promote reel efficiency by placing the pinion near the centerline of the large drive gear, resulting in greater power transfer from the crank to the rotor.
• KN body: it consists of the creation of the Hagane body, made of high rigidity aluminium or magnesium, obtaining impact resistance, eliminating bending of the body and having a solid structure, of great support for the moving internal gear.
• This is Infinity Drive it is a construction that eliminates slip resistance and performs light winding under load conditions or without it. This construction is carried out without contact, where the inside of the pinion does not reach to touch the main axis.
• X Protect: it has a triple contact lip structure which is inserted into the roller bearing to prevent water from entering it and minimize friction resistance.
• X shield: technology that focuses on blocking water intrusion into the coil, employing a dual protection of high reliability and durability. It withstands extreme saltwater conditions.
• AR-C Spool: patented coil design with an angled lip, resulting in the coil line output being with less friction, resulting in a longer and more accurate pitch.
• SA-RB: high corrosion resistance ARB ball bearings with extra protection against sand, salt and dust.

In the case of vehicles of categories N1 and N2

• Ratio: 4.6 to 1
• Capacity ((mm/m): 0,33 to 240 / 0,37 to 190 / 0,40 to 160
• Bearing capacity: 4+1
• Recycling: 83 cm
• Braking power: 10 kg
• Weight: 450 g

Type approval number of the vehicle

• Ratio: 4.9 to 1
• Capacity ((mm/m): 0,405-300 / 0,47-210 / 0,52-160 is defined as
• Bearing capacity: 4+1
• Recycling: 102 cm
• Braking power: 12 kg
• Weight: 675 g

For the purpose of this Regulation:

• Ratio: 6.2 to 1
• Capacity ((mm/m): 0,405-330 / 0,47-240 / 0,52-195 is the capacity of the vehicle
• Bearing capacity: 4+1
• Recycling: 134 cm
• Braking power: 12 kg
• Weight: 680 g

The vehicle shall be equipped with the following:

• Ratio: 5.7 to 1
• Capacity ((mm/m): 0.52 to 310 / 0.5 to 240 / 0.62 to 200
• Bearing capacity: 4+1
• Recycling: 129 cm
• Braking power: 18 kg
• Weight: 920 g

In the case of vehicles of categories M1 and N1

• Ratio: 4.4 to 1
• Capacity ((mm/m): 0,52 to 350 / 0,62 to 240 / 0,70 to 190
• Bearing capacity: 4+1
• Recovered: 104 cm
• Braking power: 18 kg
• Weight: 930 g

Specifications of the model 5000PG:

• Ratio: 6.2 to 1
• Capacity ((mm/m): 0,33 to 200 / 0,37 to 150 / 0,40 to 130
• Bearing capacity: 4+1
• Recycling: 105 cm
• Braking power: 10 kg
• Weight: 445 g

In the case of vehicles of categories M1 and N2

• Ratio: 5.7 to 1
• Capacity ((mm/m): 0,33 to 240 / 0,37 to 190 / 0,40 to 160
• Bearing capacity: 4+1
• Recovery rate: 103 cm
• Braking power: 10 kg
• Weight: 450 g

In the case of vehicles of categories N1 and N2

• Ratio: 5.6 to 1
• Capacity ((mm/m): 0.37 to 275 / 0.40 to 230 / 0.47 to 160
• Bearing capacity: 4+1
• Recycling: 107 cm
• Braking power: 13 kg
• Weight: 665 g