Controller Scubapro MK17 EVO/C370

The regulator Scubapro MK17 EVO/C370 it combines SCUBAPRO's best membrane first stage with its most recent offset second stage.
The MK17 EVO is completely weatherproof, ensuring smooth operation in cold or murky water.
Its improved internal design allows greater flow from the low-pressure inlets, which have been reconfigured to improve the orientation of the whips.
The new C370 incorporates the best features of its predecessor, the C350, plus a compensated valve that has been added to its design. Its new discharge duct, based on the design of the S620 Ti, helps to reduce breathing effort by 10% compared to the C350. A perfect regulator for all kinds of diving applications.
Stage one:

• The compensated membrane allows constant and effortless air to be extracted regardless of depth, bottle pressure or breathing rate.
• The system, isolated from the environment, prevents water or contaminants from contaminating the internal components.
• The dry chamber increases the resistance to freezing, ensuring a constant flow in colder conditions.
• Substantial increase in airflow . from 6500 l/min to 6900 l/min. which improves air supply pressure compensation.
• Two high pressure outlets and four high flow low pressure outlets maximize air regulation.
• Four high-flow LP outputs maximize the orientation options of the whips.
• Externally adjustable intermediate pressure to facilitate and expedite fine adjustment of performance by the technical service.
• Available in versions 3364 psi/INT 232 or 4350 psi/DIN 300.
• For the purposes of this Regulation, the following definitions shall apply:.
• For the purposes of this Regulation, the following definitions shall apply:.
• The pressure shall be measured at a pressure of not more than 10 kPa.

Second stage

• The compensated valve reduces the inhalation effort at any depth and supply pressure.
• The compact, sturdy case made of glass-fibre-reinforced nylon thermoplastic and the new discharge duct take up little space in a scuba bag.
• The stainless steel structure on the front cover gives it that special touch of the SCUBAPRO C Series.
• The valve and lever allow the design to retain the same dimensions as the C350.
• The discharge duct is based on the design of the S620 Ti and contributes to a reduction in breathing effort (10% reduction over the C350).
• Control of inhalation effort and VIVA (Venturi-Initiated Vacuum Assist) system control adjustable by the diver.
• Wide purge button, easy to press even with thick gloves.
• The oversized inner section of its high-flow whip allows for greater airflow on each inhalation.
• The compact, high-flow mouthpiece improves airflow and provides greater comfort to the mouth.
• Weight: 6 oz/171 g.
• The test shall be carried out in accordance with the requirements set out in Annex I.