Benelli Ethos semi-automatic shotgun. Gauges 20 and 28

The Benelli Ethos 20-gauge semi-automatic shotgun belongs to a high range. It is elegant, light, sporty and well balanced.
Design with exclusive engravings and simple and delicate lines.
It has the “Inertia Driven” system that guarantees a perfect operating cycle, maximum resistance and maximum reliability.
It also incorporates the "Progressive Control" system that guarantees maximum recoil absorption gradually, depending on the cartridge load.
“Power Bore” cannon with an exclusive cryogenic treatment.
Benelli Ethos provides exceptional performance in terms of speed, precision, power and penetration.
Barrel length: 61, 66 or 71 cm.
Available in caliber : 20 and 28
Supplied with 5 cryo-shocks.
It is presented in an original Benelli briefcase .

TECHNOLOGIES:

Inertia Driven System

Consisting of three components: the shutter, the closing head and the free spring, While the shutter is positioned in the shot position, the turning bolt moves along a profiled guide to occupy the closing head. When the trigger is pulled, all of the shotgun's components, except the shutter, move backward. Meanwhile, the inertial spring is compressed between the shutter head and the body of said shutter. In this way, the bushing moves from the chamber to the explosion chamber. The heavy inertial spring pushes the shutter group back, removing the fired cartridge. When the empty cartridge comes out, the energy is used to rearm the hammer by advancing the cartridge to the correct position, inserting a new cartridge into the chamber. This ensures smooth operation.

WOODFX

Natural and elegant grain that provides the perfect combination between the fine satin finish of the barrel and the anti-reflective finish of the chamber.

Progressive Comfort

System that progressively reduces recoil that is activated gradually, guaranteeing maximum stability and control, in order to face quickly.

PowerBore

The Cryogenic Power Bore cannon guarantees a higher speed and penetration of the target.  

TECHNICAL SPECIFICATIONS:

Cylinder head and front: Walnut with Wood FX finish with the new Progressive Comfort system.

Butt plate: special polyurethane.

Mechanics: semi-automatic inerzia Benelli with variable geometry trigger group.

Housing finish: nickel-plated housing and shutter group machined by wire drawing and chrome plating.

Length of the stock to the trigger / deviation: 365mm / adjustable right left.

Peak drop: 35 mm + -1 mm.

Heel drop: 55 mm + - 1mm.

Insurance: Transversal with a red armed signal to shoot.

Trigger protection: technopolymer-gold finish.

Trigger: Removable trigger group.

Sights: red fiber optics.